Asahipen All One Mortar Repair Material 750g Gray A001

[Features]
●Cement-based base preparation material that can be applied with a roller bucket or brush.
● Repair and undercoating of deteriorated concrete and mortar surfaces can be done at the same time.
●Can also be used as a finishing touch.
●The mortar is flexible and hard to crack.

(Application)
●It can also be used for repairing, undercoating, and finishing unpainted concrete and mortar walls and floors.
* Not suitable for areas where water is constantly accumulated.
●Can be applied to ALC, porcelain tiles (excluding those with smooth or surface-treated surfaces), glass, plasterboard, etc.
●When overcoating, please use water-based paint. If you want to make the most of the texture of concrete, we recommend "water-based block stain".

[Mixing method]
For deteriorated surfaces such as cracks (cracks up to 2 mm wide)
Mixing ratio (weight ratio)
This product: water = 10: 4-5

*For relatively clean surfaces such as hair cracks, you can add up to 60% to 70% of the water.
* If you add more than 70% water, the performance may not be sufficiently obtained.

【how to use】
● Wipe off dust, oil and water from the substrate. If there is old paint film, remove it thoroughly.
●Use painting tools such as roller buckets, brushes, and trowels on the areas to be applied. Do not use animal hair brushes or microfiber rollers that absorb a lot of water.
●The finish of this product may vary depending on the condition of the substrate, the application method, and the amount of water added.
*It may not adhere well to special concrete or mortar that has undergone surface treatment. *If the substrate is hot, sprinkle water before installation.
●If there are cracks in the substrate, touch up the cracks first before applying the product.
● Top coat the paint. If you don't care about the finish, you don't have to worry about overcoating. (If weather resistance is required, apply a topcoat.)
●Apply the topcoat after the product has hardened. Regarding the usage of the topcoat paint, please use it according to the usage of each paint.

【detail】
・Standard: 750g
·amount to use:
[Estimated construction area]
Degraded surface such as cracks / 750g: 3.5-5.3m2 (2.1-3.2 tatami sheets)
[Guidelines for relatively clean surfaces such as hair cracks]
750g: 4.3-6.4m2 (for 2.6-3.9 tatami sheets)
・Materials/ingredients: Portland cement, silica sand, titanium oxide, acrylic resin Liquid properties: Alkaline ・Drying time: Normal season (20°C)/approximately 3 hours Winter (5°C)/approximately 5 hours Time * Please apply within the pot life after mixing this product and water.